Rockwell Automation 1769-SDN Compact I/O DeviceNet Scanner Module Installation Instructions - Manual (Page 11)

Compact I/O DeviceNet Scanner Module 11
Publication 1769-IN060C-EN-P - May 2002
Panel Mounting Using the Dimensional Drawing
NOTE: All dimensions are in mm (inches). Hole spacing tolerance: ±0.04 mm (0.016 in.).
Compact I/O with CompactLogix Controller and Power Supply
Compact I/O with MicroLogix 1500 Base Unit and Processor
132 mm (5.19 in)
122.6 mm (4.83 in)
118 mm (4.65 in)
147.4 mm (5.81 in)
14.7 mm
(0.58 in)
35 mm
(1.38 in)
35 mm
(1.38 in)
28.5 mm
(1.12 in)
35 mm
(1.38 in)
70 mm
(2.76 in)
35 mm
(1.38 in)
35 mm
(1.38 in)
35 mm
(1.38 in)
50 mm
(1.97 in)
40 mm
(1.58 in)
59 mm (2.32 in)
59 mm (2.32 in)
DIN Rail
Center Line
Mounting Hole
Dimension
132 mm (5.19 in)
122.6 mm (4.83 in)
118 mm (4.65 in)
147.4 mm (5.81 in)
14.7 mm
(0.58 in)
35 mm
(1.38 in)
168 mm
(6.62 in)
147 mm
(5.79 in) 35 mm
(1.38 in)
13.5 mm
(0.53 in)
59 mm (2.32 in)
59 mm (2.32 in)
28.5 mm
(1.12 in)
DIN Rail
Center Line
Mounting Hole
Dimension