Rockwell Automation D17846.2.4 CONTROLNET KT EMULA - Manual (Page 4)

Publication 1784-6.2.4 - September 1997
P-2 Preface
What You Receive with This
Package As you read this manual, you need to know that:
This: Refers to this:
KTCX card 1784-KTCX card
BA Base address of the KTCX card as installed.
DP ADDR The dual-port address. It is located at 03000h
(3000:0000h) beyond the installed address of
the KT module.
DP ADDR :0800h to :0806h Memory-mapped hardware addresses.
h hex code
host Personal computer or workstation of driver.
XXXXXh XXXX:XXXXh
node The point at which devices interface with the
network.
sending node (also originating node) The (originating) node sending the command
or message.
receiving node The node sending the reply to the command.
local network The network containing the originating node.
PCCC Programmable Controller Communication
Commands
LSAP Link Service Access Point
on-link node A node on the local network.