Rockwell Automation 1753-OPC GuardPLC OPC Server - Manual (Page 2)

Publication 1753-IN007B-EN-P - July 2005 PN 40071-168-01(2)
Supersedes Publication 1753-IN007A-EN-P - March 2004 Copyright © 2005 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Installing GuardPLC OPC Software
You must have administrator access to the computer on which you are installing the
OPC server.
1. Insert the GuardPLC OPC Server CD-ROM into the CD drive.
If Autoplay is enabled, the software installation starts automatically. If this is
not the case, you can start the installation by clicking on
d:\RSLogix_Guard_PLUS_OPCServer\setup.exe (where “d” is your CD
drive).
2. On the setup screen, click on Install GuardPLC OPC Server and follow the
installation prompts. You will be prompted to enter your serial number,
which is found on your license agreement.
GuardPLC is a trademark of Rockwell Automation, Inc.
Pentium is a registered trademark of Intel.
Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
TIP
To uninstall the GuardPLC OPC server, use the
Add/Remove Programs tool in your Windows ® Control Panel.