Rockwell Automation 1757-SWKIT400 ProcessLogix R400.0 Server Installation Instructions - Manual (Page 6)

6 ProcessLogix R400.0 Server Installation Instructions
Publication 1757-IN914A-EN-P - October 2001
Changing the network settings
1. Right click the My Network Places icon on the Desktop and select
Properties.
2. Right click the Local Area Connection icon and select Properties.
3. Select Internet Protocol (TCP/IP) and click Properties.
Refer to Step 18 of “Completing the Windows 2000 Server Installation” in the
ProcessLogix R400.0 Installation and Upgrade Guide for details.
Setting the date and time
To correctly set the date and time:
1. Click Start
⇒
Settings
⇒
Control Panel.
2. Double-click the Date/Time icon.
3. At the Date and Time Settings window:
•
If necessary, adjust the Date and Time settings.
•
Set the appropriate Time Zone for your location.
•
Uncheck the Automatically adjust clock for daylight saving changes
option.
•
Click Next.
Creating an Emergency Repair disk
1. Click Start
⇒
Programs
⇒
Accessories
⇒
System Tools
⇒
Backup.
2. Click Emergency Repair Disk.
3. Follow the on-screen prompts to create an Emergency Repair disk.
ATTENTION
!
Failure to uncheck the Automatic adjustment for Daylight
Savings Time will cause Redundant Systems to loose “Sync”
when the time is automatically adjusted. Choosing not to
automatically adjust the time allows you to decide when to
make the adjustment (at a time that is not critical to your
process).