Rockwell Automation 1747-BA SLC 500 Lithium Battery - Manual (Page 4)

4 Guidelines for Handling Lithium Batteries
Publication 1747-IN515A-EN-P - May 2004
Safety Considerations
For lithium batteries installed in Class I, Division 2 Hazardous Locations:
ATTENTION
Failure to follow the guidelines in this document may result in
damaged equipment and/or personal injury.
Use the battery for its intended application only.
IMPORTANT
Do not:
•
charge the battery
•
open, puncture or crush the battery
•
incinerate or expose the battery to high temperatures
•
solder leads
•
short positive or negative terminals together
•
ship or dispose of battery except according to the procedures
in this document
WARNING
Explosion Hazard - Batteries must only be changed in an area
known to be non-hazardous.
AVERTISSEMENT
AVERTISSEMENT
RISQUE D'EXPLOSION - Afin d'eviter tout risque d'explosion,
s'assurer que l'emplacement est designe non dengereux avant
de changer la batterie.