Belkin High Performance Wireless VPN Router N300 - Manual (Page 69)

66
WIRELESS
Initializing WPS Feature
There are two methods to initialize the WPS feature: Push Button and Pin Code methods.
1. WPS Push Button Method
Push the WPS button on the F9K1004, the Wireless LED
light will start to flash when WPS process is ready.
While the Wireless LED is flashing on the F9K1004, press the
WPS button on your wireless client. This could either be a
physical hardware button, or a software button in the utility.
2. Pin Code Method
Note the Pin code of your WIRELESS ROUTER device.
Please use this Pin code to initiate the WPS process
from the wireless client configuration utility.
This process will be different for each brand or model. Please
consult the user manual of the wireless client for more information.