Boulder Amplifiers Integrated Amplifier 865 - Manual (Page 20)

After several seconds of not changing the balance, the display
will return to the “VOLUME...” indication. You may also return to
controlling volume by again pressing the BALANCE pushbutton. The
balance resolution is the same as for the volume control, 0.5 dB steps.
WARNING: If the input is programmed to be in “THEATER MODE,”
then the balance control will have no effect.
For more information, see THEATER MODE in the programming
section on page 4-5.
MUTE
To temporarily reduce the volume, press the MUTE pushbutton.
“VOLUME MUTED” will show in the display, replacing the volume
indication. Again pressing the MUTE pushbutton will return the
volume to normal level.
While muted, the level of both channels will be set to -100 dB,
regardless of volume setting.
OPERATION
2-5