Rockwell Automation 1734D-IA8XOW8S POINTBlock ac 8 Input/8 Relay Output Module - Manual (Page 3)

POINTBlock ac 8 Input/8 Relay Output Module 3
Publication 1734-5.23 - February 2000
To set the node address, set the combination of 1’s and 10’s to
correspond to the required address. (For example, for 61, set the 10’s
switch to 6 and the 1’s switch to 1.)
ATTENTION
!
POINTBlock is designed to be grounded through
the DIN rail to chassis ground. To assure proper
grounding of POINTBlock and POINT I/O
adapters and terminal bases to chassis ground, the
recommended DIN rail material is zinc-plated,
yellow-chromated steel. Mount POINTBlock,
POINT I/O adapters and terminal bases only to
zinc-plated, yellow-chromated steel.
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7 0-9
10-60
Inputs Outputs
42004
10’s Node Address Rotary Switch
1’s Node Address Rotary Switch
Module Status
Network Status
I/O status