Rockwell Automation 1738-VHSC24M23 ArmorPoint 24V dc Very High Speed Counter Module, Series A - Manual (Page 5)

Publication 1738-IN011B-EN-E - August 2013
ArmorPOINT 24V DC Very High Speed Counter Modules, Series A 5
Install the mounting base as follows:
1. Lay out the required points as shown above in the drilling dimension
drawing.
2. Drill the necessary holes for #8 (M4) machine or self-tapping screws.
3. Mount the base using #8 (M4) screws.
4. Ground the system using the ground lug connection. (The ground lug
connection is also a mounting hole.)
Ground lug connection
Latching mechanism
Keyswitch-
Set to position 2 for
the 1738 specialty
modules
Mounting base
43675