Rockwell Automation 1792D-4BVT4D ArmorBlock MaXum 4 Input/4 Output Module Series B - Manual

Publication 1792D-IN012B-EN-P - September 2000
Installation Instructions
ArmorBlock MaXum 4 Input / 4 Output
Module Series B
(Cat. No. 1792D-4BVT4D)
This ArmorBlock MaXum
™ I/O module (Cat. No. 1792D-4BVT4D) is
a stand-alone 24V dc I/O product which communicates via a
DeviceNet
™ network. The sealed housing of this module requires no
enclosure.
This module has 4 inputs and 4 outputs accessed through Y splitter
cables. Inputs are 24V dc PNP (sourcing) or NPN (sinking) devices.
Four self-protected 24V dc outputs can provide up to 1.0 amp each.
Diagnostic features included are short circuit, open wire and no load
detection reported to the point level. Local logic control has been
added to the Series B version of this product.
30702-M