BenQ FP767 - Manual (Page 38)

BenQ LCD Color Monitor User's Guide
English 37
Adjusting the Monitor
A Look at the Control Panel
There are 6 keys for user’s control including “iKey”, “Exit”, “Enter”, “<” and “>” key and a power
swith.The following descriptions are the introduction of these keys & switch.
1.
“Power”: Turn the power on or off.
2. “iKey” : Adjust vertical position, phase, horizontal position and pixel clock automatically.
3. “Exit” key: Back to main menus, save menu or exist OSD menu without saving.
4. “Enter” key: Enter sub-menus, select items or save items.
5. “<”: For Left adjustment. Left key is the hot key for Contrast adjustment.
6. “>”: For Right adjustment. Right key is the hot key for Brightness adjustment.
Hot Key Mode
Contrast hot-key
Brightness hot-key
Volume hot-key
1. Press Left key to activate Contrast hot-
key.
2. Press Left/Right key to reduce/increase
the value of contrast.
3. Press Exit key to leave the hot-key
mode.
4. The scale of adjustment is 0-100.
1. Press Right key to activate Brightness
hot-key.
2. Press Left/Right key to reduce/increase
the value of brightness.
3. Press Exit key to leave the hot-key
mode.
4. The scale of adjustment is 0-100.
1. Press Exit key to activate Volume hot-
key.
2. Press Left/Right key to reduce/increase
the value of volume.
3. Press Exit key to leave the hot-key
mode.
4. The scale of adjustment is 0-100.
Exit Enter