Behringer S1220 - Manual (Page 4)

EUROLIVE S1020/S1220/S1220F/S1520/S1530/S1800S
Connections 4
Introduction 1.
By purchasing a BEHRINGER S Series loudspeaker, you have
obtained an outstanding PA loudspeaker system. Now, you own (at
least) one component of an expandable system that reproduces
your music with a balanced and pure sound. Thanks to its numer-
ous features, the S Series is the ideal PA loudspeaker system: it
is equally well-suited for both small gigs and larger stages. We
have brought it to life in order to offer you a complete selection
of loudspeakers. In doing so, we have left open all the options
for expanding your PA system. All loudspeakers feature output
connectors, letting you flexibly expand your setup whenever you
need to.
The following instructions are intended to familiarize you +
with the specialized terminology used throughout this
user manual in order for you to master all the functions.
After having thoroughly read the user manual, store it
in a safe place for future reference.
Before you get started 1.1
Shipment 1.1.1
Your loudspeaker was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard box
suggest that damage may have taken place, please inspect the
unit immediately and look for physical indications of damage.
Damaged units should NEVER be sent directly to us. +
Please inform the dealer from whom you acquired the
unit immediately as well as the transportation company
from which you took delivery of the unit. Otherwise,
all claims for replacement/repair may be rendered
invalid.
Please always use the original packaging to avoid dam-
+
age due to storage or shipping.
Never let unsupervised children play with the loud-
+
speaker or its packaging.
Please dispose of all packaging materials in an environ-
+
mentally friendly fashion.
Information
The sound quality may diminish within the range of pow- +
erful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the
device and use shielded cables for all connections.
Online registration 1.1.2
Please remember to register your new BEHRINGER equipment
right after your purchase by visiting www.behringer.com (alterna-
tively www.behringer.de) and read the terms and conditions of
our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original equip-
ment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the
distributor nearest you. A list of distributors can be found in the
support area of our website (www.behringer.com/support).
Registering your purchase and equipment helps us process your
repair claims quicker and more efficiently.
Thank you for your cooperation!
Connections 2.
Connection panel Fig. 2.1:
Two ¼" loudspeaker inputs are wired in parallel. You can optionally
connect one of the connectors to the output on your power amp,
and tap into the signal on the second connector in order to feed
this signal into an additional loudspeaker.
¼" TS loudspeaker connector Fig. 2.2:
ATTENTION: Never connect more than one power amp +
output to the loudspeaker system. This may permanently
damage your setup.