Rockwell Automation 1738-OA2M12AC3 ArmorPoint AC Output Module, Series A - Manual (Page 9)

Publication 1738-IN007A-EN-E - June 2004
ArmorPoint AC Output Module, Series A 9
Specifications Following are specifications for the 1738 ArmorPoint AC output
module.
Indication Probable Cause
I/O Status
Off Output is inactive
Yellow Output is active and under control
ArmorPoint AC Output Module
Outputs per Module
2 (1 group of 2) nonisolated, sourcing
On-state Voltage Rating
Maximum
Minimum
Nominal
264V ac
74V ac
120/220V ac
On-state Voltage Drop, Maximum 1.0V @ 0.75A
On-state Current
Maximum
Minimum
750 mA per channel
10 mA per channel
Output Current Rating 1.5 A (2 channels @ 0.75A each)
Surge Current, Maximum 16 A for 100 ms, repeatable every 10s
Delay Time OFF to ON
1
, Maximum
1/2 cycle
Delay Time, ON to OFF
1
, Maximum
1/2 cycle
Off-state Leakage, Maximum 2.7 mA
External AC Power Supply Voltage 120/220V ac, 60Hz nominal
External AC Power Supply Voltage Range 85-264V ac, 47-63Hz
Keyswitch Position 8
General Specifications
LED Indicators 2 yellow output status, logic side
1 green/red network status, logic side
1 green/red module status, logic side
PointBus Current 75 mA @ 5V dc
Power Dissipation, Maximum 0.8 W @ 264V ac
Thermal Dissipation, Maximum 2.7 BTU/hr. @ 264V ac
Isolation Voltage
(continuous-voltage withstand rating)
120/220V rms
Tested at 1500V ac rms for 60s
Dimensions Inches (Metric) 1.25H x 2.63W x 4.25D (31.75H x 66.80W x 107.95D)
Operating Temperature IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20 to 60°C (-4 to 140°F)
Storage Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),
-40 to 85°C (-40 to 185°F)