Rockwell Automation 1738-IA2M12AC4 ArmorPoint AC Input Modules, Series A - Manual (Page 5)

Publication 1738-IN006B-EN-E - July 2004
ArmorPoint AC Input Modules, Series A 5
Install the mounting base as follows:
1. Lay out the required points as shown above in the drilling
dimension drawing.
2. Drill the necessary holes for #8 (M4) machine or self-tapping
screws.
3. Mount the base using #8 (M4) screws.
4. Ground the system using the ground lug connection. (The
ground lug connection is also a mounting hole.)
Ground lug connection
Latching mechanism
Keyswitch-
Set to position 8 for
the 1738 AC input
modules
Mounting base
43675