Rockwell Automation 2361 Snubber Assembly Replacement - Manual (Page 3)

Snubber Assembly Replacement (for 1250 and 1650A 1395 DC Drives) 3
Publication 2361-5.14 - July 1998
Preliminary Steps Before replacing the snubber assembly, shut off the drive power, wait
five minutes for the voltage to discharge, open the bridge bay door,
and remove all Lexan™ guards shielding the snubber assemblies.
Heatsink Assembly
Negative (lower)
regenerative example
4
3
Two bolts for
busbar connection
One bolt for
Glastic mount
5
Removing The
Assembly
(Upper Assemblies
Only)
2