Replacing the field board, Concluding steps – Rockwell Automation 2361 90A Field Board Replacement User Manual
Page 4
Lexan is a trademark of General Electric Corp.
Publication 2361-5.12 - July 1998
P/N 185412
1998 Rockwell International. All Rights Reserved. Printed in USA
Replacing the Field Board
1.
Mount the board, securing the six mounting screws.
2.
Connect gate leads to G11, G12, G21, and G22 accordingly.
3.
Fasten F1, F2, L3, and L1 leads to the board.
4.
Connect J1.
5.
Secure the feedback board panel in the upright position.
6.
Secure the control board panel in the upright position.
Concluding Steps
After installing the field board, replace all Lexan shielding and secure the
disconnect bay door. To have the board repaired, place the board in an
electrostatic-safe bag and send it to the manufacturer. Dispose of old parts
according to your company procedures and local codes.