Bowers & Wilkins DM12 - Manual

DM12
Stand-mount/Bookshelf loudspeaker system
Product Summary
● The DM12 addressed the noticeable trend towards smaller loudspeakers. But nearly all these so
called mini monitors suffer from inadequate bass performance, low sensitivity or poor power
handling capability.
Technical highlights
● The unique B&W polymer bass/mid-range driver cone enables the DM12 to recreate realistic
sound pressure levels, even at low frequencies.
● Utilising B&W’s APOC overload-protection circuit, the DM12 can safely be used with even the
highest powered amplifiers.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Drive Units
Frequency Response
Sensitivity
1 x 26mm polyester weave dome
26mm high temperature voice coil
1 x 150mm bass/midrange driver
Bextrene cone with 26mm high-
temperature voice coil
85Hz to 20kHz ±2dB
1 watt into 8 ohms for spl of 85dB at
1m sinewave input at 300Hz
Nominal Impedance
Power Handling
Dimensions
Finish
8 ohms
15W. No upper limit because of
electronic overload protection device.
Height: 355mm Width: 220mm
Depth: 270mm
Standard: teak, walnut,
Special: rosewood, black ash