Bushnell WEATHERFXI 960040 - Manual (Page 4)

4
INITIAL SETUP & SOFTWARE INSTALLATION
SETTING UP THE MAIN UNIT (RECEIVER)
BATTERY INSTALLATION:
-Slide open the battery door, install six AA batteries (alkaline or lithium)
according to the polarity indicated and close the battery door.
USB TRANSMITTER & PC PROGRAM INSTALLATION
BATTERY INSTALLATION & USB CONNECTION
-Slide open the battery door on the bottom of the USB transmitter, insert
three AAA batteries (alkaline or lithium), noting the polarity marks.
Close the battery door.
-Connect the USB transmitter to your PC via any available USB port
PC PROGRAM INSTALLATION
-Before installation, ensure that
1)Your PC is connected to the Internet. Try browsing through a couple
of websites to make sure.
)You are using Windows 000, XP or Vista (Windows 98 and Macs
are not supported).
3)The USB transmitter is connected properly to your PC via a USB
port (a USB hub may be used if necessary).
-Insert the provided CD into the CD-Rom drive of your PC. If it does
not automatically play, go to the Windows “Start” menu, and click “My
Computer”, then locate and double click on the icon for the CD to view
its contents (the CD contains only the install file).
-Double click the program on the CD, named “Download_194B.
exe” to launch the install window. Click INSTALL to run the 4-Day
Forecast Setup Wizard and follow the on-screen directions. Note: If the
installation program detects that Microsoft .NET Framework 2.0 driver
is not already installed on your computer, it will prompt you to install
the driver. Follow the instructions to install the driver and complete the
rest of the installation.
-After the installation is completed, double click the 4-Day Forecast
icon ( ) on the Window’s desktop to open the program window and
click “SETTING” in the HOME WEATHER display Then click SET
LOCATION to enter your home city location on the 4-Day Forecast
software.