Rockwell Automation 2090-UCSR-P900 900 Watt Passive Shunt Module Installation - Manual (Page 8)

Publication 2090-IN001A-EN-P — March 2001
8 900 Watt Passive Shunt Module
Product Specifications Specifications for the passive shunt module are provided in the
following tables. Physical measurements are shown in Figure 4 on
page 9.
General Specifications Description
Weight net 3.31 kg (7 lbs)
shipping 4.08 kg (9 lbs)
Resistance 18
Ω ± 10%
Power rating peak 10 kW
continuous 900 W
Fuse 10 Amp, 700 VDC, fast acting
(Bussmann FWP10A14F)
Environmental Conditions Value
Vibration 2g at 10 to 2000 Hz
Shock 15g 11 msec half sine
Altitude 1500 m (5000 ft)
Humidity 5% to 95% non-condensing
Ambient operating temperature
1 0° to 50° C (32° to 122° F)
Air flow clearances 155 mm (6.1 in.) on all sides for air flow.
1 Power performance increases about 5.5 W for every 1°C (3.1 W/°F) drop in ambient temperature.
Mounting Hardware Size
Hex cap screws 1/4 in. - 20
Hex cap screws (metric) M6
Wiring Size
75°C copper wire
8.4mm
2
(8 AWG)
Terminal Block Screws Torque
Chrome plated brass 4.0 Nm (35 in.-lbs)