Rockwell Automation 2755-NB40, -NB41 AdaptaScan Wiring Base - Manual (Page 2)

Catalog Number 2755-NB40, -NB41
Instructions
AdaptaScan Wiring Bases
2
The following shows the dimensions clearances for the wiring base and the
Reader/wiring base assembly.
Wirng Base
Front View
Wiring Base
End View
Wiring Base
Bottom View
3.87 Inches
(98 mm)
1.67 Inches
(42 mm)
5.36 Inches
(137 mm)
3.87 Inches
(98 mm)
5.36 Inches
(137 mm)
1.67 Inches
(42 mm)
Side View
Midpoint of Scan Line
Front View
5.82 Inches
(143 mm)
Variable
Leave 1 inch (25.4 mm) Clearance for
Reader installation and viewing of LED indicators.
There are 2 options for mounting the wiring base (Catalog No. 2755-NB40
or -NB41):
•
Top Mounting
Mount the base using mounting screws through the top mounting holes.
•
Bottom Mounting
Mount the base using screws through the mounting surface into threaded
holes on the bottom of the wiring base.
Mounting Dimensions
and Clearances
Mounting the Wiring Base