Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 47)

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014 47
Component Replacement Chapter 4
Drive Precautions Follow these precautions when working with a drive.
• Do not touch internal components.
• Always handle the drive by its frame.
• Do not remove or install a drive with the power on except in circumstances
allowed by the operating system.
• Store the drive in an antistatic bag when it is not installed.
Replace a Drive Follow these steps to replace a drive (HDD or SSD), which is on the side of the
computer.
1. Read and follow
Drive Precautions on page 47 before performing any drive
removal.
2. Follow the steps for
Pre-configuration on page 44 .
3. Remove the one screw that secures the drive assembly (A).
IMPORTANT Back up or clone your computer before replacing a drive.
See AMI Rescue on page 83 for more information on backing up your system
image.
SHOCK HAZARD: Electrostatic discharge (ESD) can damage the computer and
components. Read and follow
Electrostatic Discharge Precautions on page 44
before removing a drive.
Failure to follow proper safety precautions can result in severe electrical shock to
an individual or ESD damage to the computer and its components.
ATTENTION: Mechanical shock can damage a drive. Do not drop or bump the
drive.
Extended
Carrier Lever
Extended
Carrier Lever
C
D
B
A
K
J
H
F
G
E
E
E
E
I
Integrated Display Model Shown