Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 99)

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014 99
Chapter
8
Maintenance
Chapter Objectives This chapter provides information on how to Clean the Computer .
Clean the Computer It is important to maintain your computer by cleaning the display, heat sink and
vent holes, and removing grease or paint.
Clean the Integrated Display
Perform the following steps to clean the display.
1. Disconnect power from the computer at the power source.
2. Clean the display with a mild soap by using a clean sponge or a soft cloth.
3. Dry the display with a chamois or moist cellulose sponge to avoid water spots.
IMPORTANT 6181P computer bezels resist the following chemicals:
• Alcohol (methyl or ethyl)
• Cleaning naphtha
• Commercial glass cleaners
• Ammonia (10% dilute solution)
• Oil (hydraulic or motor)
• Diesel fuel
• Gasoline (leaded or unleaded)
• Antifreeze mixtures (such as ethylene glycol)
• Automatic transmission fluid
ATTENTION: If the computer has a touchscreen, it is possible for screen
objects to activate during equipment wash-downs if the computer is
turned on.
ATTENTION: Use of abrasive cleansers or solvents can damage the
display window. Do not scrub or use brushes.