Rockwell Automation 2361 Armature Pulse Transformer Board Replacement - Manual (Page 4)

Lexan is a trademark of General Electric Corp.
Publication 2361-5.11 - May 1998 P/N 185411
 1998 Rockwell International. All Rights Reserved. Printed in USA
Replacing an Armature-Pulse
Transformer Board 1. Gently press the board onto the nylon mounting posts until locked into
place.
2. Connect the 4-terminal connector to J1. Check that the individual leads
are secured in the terminals.
3. Connect the gate lead connector to J2. Check that the individual gate
leads are secured in the terminals.
Concluding Steps After installing the new board, replace all Lexan shielding and secure the
bay door. Dispose old parts according to your company procedures and
local codes.