Rockwell Automation FD86N Drive Systems Enclosure Hardware - Manual (Page 11)

Publication S-3062 – November 1997
Chapter
1
Overview of the FD86N Enclosure
Introduction This chapter provides general information about the FD86N enclosure.
What is the FD86N Enclosure? The control enclosure described in this manual is a Rockwell
Automation Drive Systems product.
The FD86N enclosure is of deadback construction and can consist of
one or more enclosures fastened together. Enclosures fastened together
form a rigid, free-standing enclosure lineup assembly designed to
accommodate a drive system.
Standard overhead AC or DC bus distribution assemblies can be
mounted on the FD86N enclosure. Pull boxes can be mounted on the
distribution or bus bar assembly for user conduit entry.
The cabinet meets or exceeds the requirements of the latest published
standards, including:
•
UL 50
•
UL 508
•
UL 508A
•
CAN/CSA C22.2 No. 14
•
NEMA 250
The Type 12 cabinet has been tested and approved by UL.
A typical FD86N enclosure is shown in 1.1.
Standard Features of the
FD86N Enclosure
FD86N enclosure features include:
•
bolt-together construction
•
enclosure color ANSI 49 medium light gray
•
a white control panel
•
padlockable door latches
•
hinged, removable doors
•
dimensionally aligns with Bulletin 2100 CENTERLINE motor
control center (MCC) design
•
grounded doors