Agency certification (when product marked) – Rockwell Automation 1440-TB-D XM-943 Expansion Relay Terminal Base User Manual

Page 15

Advertising
background image

XM-943 Expansion Relay Terminal Base 15

Publication

GMSI10-IN023A-EN-P - May 2010

1

DeviceNet communication is not used by the XM-943 but DeviceNet connections are available on the
terminal base unit and the side connector.

Agency Certification (when product marked)

2

See the Product Certification link at www.rockwellautomation.com for Declarations of Conformity,
Certificates and other certification details.

24

Relay 2 common contact 1

50

DeviceNet V (-) (black wire)

1

25

Relay 3 common contact 2

51

CAN_Low (blue wire)

1

IMPORTANT

The DeviceNet power circuit through the XM module interconnect, whichis
rated at only 300mA, is not intended or designed to power DeviceNet loads.
Doing so could damage the module or terminal base.

To preclude this possibility, even unintentionally, it is recommended that
DeviceNet V+ be left unconnected.

UL

UL Listed for Ordinary Locations

UL

UL Listed for Class I, Division 2 Group A, B, C, and D Hazardous Locations

CSA

CSA Certified Process Control Equipment

CSA

CSA Certified Process Control Equipment for Class I, Division 2 Group A, B, C,
and D Hazardous Locations

EEX

2

European Union 94/9/EEC ATEX Directive, compliant with EN 50021; Potentially
Explosive Atmospheres, Protection “n”

CE

2

European Union 89/336/EEC EMC Directive

C-Tick

2

Australian Radiocommunications Act, compliant with:

AS/NZS 2064, Industrial Emissions

No.

Description

No.

Description

Advertising