Rockwell Automation 1440-5AFUSEKIT 5A Fuse Kit - Manual

5A Fuse Kit
Catalog Number 1440-5AFUSEKIT
Installation Instructions
Description
The Fuse Kit limits the available current from listed Safety Extra Low Voltage
(SELV) or Protected Extra Low Voltage (PELV) sources. The kit allows use
of SELV or PELV supplies as an alternative to a listed Class 2 power source
for an Allen-Bradley XM
® Series Machine Condition Monitoring system.
Technical Data
• Use only Bussmann model MDA-5-R fuse
• Use solid/stranded wire 0.2 - 6 mm2 / 30-10 AWG, wire
• Tightening torque 0.5 - 0.6 Nm / 4.5 - 5.3 lb-in
• Stripping length 10 mm / 0.4 in
Installation Procedure
1. Mount the End Plate and Fuse Holder on a DIN rail.
2. Install one Bussmann fuse into the Fuse Holder.
Retain the second fuse as a spare.
3. Wire per Application Technique ICM-AP005A-EN-E.
Contents
Manufacturer Part Number Description Qty
Weidmuller WSI 4/2 C1D2 Fuse Terminal 1
Weidmuller WAP WSI 4/2 End Plate, Fuse Terminal 1
Bussmann MDA-5-R Fuse, Ceramic Tube, 1/4” x 1-1/4” 2
WARNING
• Disconnect from power source before installing or servicing
• In hazardous area applications these instructions must be followed.