Brother Printer DCP-J140W - Manual (Page 54)

44
Network Difficulties
Difficulty Suggestions
Cannot print over the network. Make sure that your machine is powered on and is online and in the Ready mode.
Print a Network Configuration list (uuAdvanced User’s Guide: Reports) and
check the current Network settings printed in this list.
If you are using a wireless connection or are having Network problems
uu
Network User’s Guide: Troubleshooting
The network scanning feature does
not work. It is necessary to configure the third-party Security/Firewall Software to allow
Network scanning. To add port 54925 for Network scanning, enter the information
below:
In Name: Enter any description, for example Brother NetScan.
In Port number: Enter 54925.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
(Macintosh)
Re-select your machine in the Device Selector application located in
Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the
model list in ControlCenter2.
The Brother software cannot be
installed.
(Windows ® )
If the Security Software warning appears on the PC screen during the installation,
change the Security Software settings to permit the Brother product setup
program or other program to run.
(Macintosh)
If you are using a firewall function of anti-spyware or antivirus security software,
temporarily disable it and then install the Brother software.
Cannot connect to wireless
network. Investigate the problem using the WLAN Report.
Press Menu, and then press a or b to choose 4.Print Reports. Press OK.
Press a or b to choose 3.WLAN Report, and then press OK.
(uuNetwork User’s Guide)
Reset the network settings. Press Menu, and then press a or b to choose 3.Network. Press OK. Press a or
b
to choose 0.Network Reset, and then press OK.
(uuNetwork User’s Guide)