AJA Ki Pro - Manual (Page 32)

Ki Pro v3.2 www.aja.com 32
Applying Power
Warning!
Since the Mains plug is used as the disconnection for the device, it must remain
readily accessible and operable.
Warning!
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the device.
Warning!
Unplug this device during lightning storms or when unused for long periods of time.
Warning!
Do not open the chassis. There are no user-serviceable parts inside. Opening the
chassis will void the warranty unless performed by an AJA service center or licensed
facility. Remove the supplied AC line cord from mains power when moving the unit.
Do not defeat the safety purpose of the grounding-type plug..
Warning!
Ki Pro has no user-serviceable parts. To remove power from the unit, remove the 4-pin
XLR power connector to ensure disconnection. Refer all servicing to qualified service
personnel. Servicing is required when the device has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the device, the device has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Warning!
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
Warning!
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the device.