AJA HA5-Plus Version 1.3 - Manual (Page 7)

HA5-Plus Mini-Converter v1.3 www.aja.com 7
User Controls
MiniConfig Control
Auto controls configures the unit automatically to match the input and output video
parameters. Advanced MiniConfig control supports setting the RGB video range, and
adjusting audio input, conversion, and routing to embedded HDMI audio.
Configuration set via MiniConfig is stored in the HA5-Plus unit through subsequent
power cycles.
Installation
Typically, HA5-Plus installation consists of the following steps:
1. Ensure the HA5-Plus is disconnected from power.
2. Connect equipment to the converter HDMI input connector, the output BNC
connector, and the analog audio inputs (if used).
3. Connect audio equipment to RCA connectors (optional)
4. Apply power to the converter (AJA power supply included).
5. The converter will now run using the default factory settings. If you wish to alter the
factory settings, you’ll need to:
• Install the AJA MiniConfig software (supplied on CD) on your computer
• Attach the converter via USB
• Make your changes using MiniConfig setup screens.
6. This process is detailed in “USB Control and Setup—Using AJA MiniConfig” on page 8 .