Config screen, System name, Snmp enable – AJA FS2 User Manual
Page 140: System name snmp enable
142
Config Screen
The Config screen includes functions to hide or show unused menus and change
the front panel display brightness.
FS2 Web Interface, Config Screen
System Name
The System Name parameter sets the name of the FS2 system. To change the
System Name, click on and drag the cursor across the displayed name, and type in a
new name.
SNMP Enable
The SNMP Enable parameter turns ON and OFF all SNMP messaging between the
FS2 and an external client. Refer to Chapter 6 for a description of SNMP and how the
FS2 supports it. When SNMP is enabled, one or more of these alarms may be sent by
the FS2 as a trap message:
•
Power supply failure or disconnection: FS2PSAlarm (see parameter 5)
•
Reference video: FS2REFAlarm (see parameter 60.4)
•
Format: FS2FMT1Alarm for Vid1 (see parameter 6.1)
•
Format: FS2FMT2Alarm for Vid2 (see parameter 6.2)
•
Format—Background Jam: FS2JAM1Alarm for Vid1 (see parameter 6.1)
•
Format—Background Jam: FS2JAM1Alarm for Vid2 (see parameter 6.2)
•
Temperature of FS2 is over limit (internally): FS2OVRAlarm
(1) System Name
Selections
Selection Descriptions
Variable
Highlight the existing name and type in a new name, up to 20
characters. Allowed characters are A-Z, a-z, numerals, hyphen, and
period.