AJA D10AD - Manual (Page 6)

6
Switch 7—Configure Automatic Gain Control (AGC)
:
Switch 8—Turn Test Pattern Output ON/OFF
:
Installation
Typically, D10AD installation consists of the following:
1. disconnect +5VDC from the convertor
2. configure the DIP switch for the desired equipment configuration and video formats
3. connect video equipment to the convertor BNCs
4. apply +5VDC power to the converter (AJA power supply model DWP)
Specifications
ON OFF
Automatic Gain ON Automatic Gain Off (Unity Gain)
ON OFF
Internal color bars are output Disables test pattern output (normal video
operation)
Item Specification
Serial Outputs SDI (SMPTE 259M) w/EDH
All outputs are separately buffered
4 x BNC
Frequency Response Y +/-0.15db to 5.5 Mhz
C +/-0.15db to 2.5 Mhz
2T K factor Less than .5% K Factor (2T)
Differential Gain < 1%
Differential Phase < 1 degree
A/D Converters 10 bits, 2X oversampling
User Controls Selectable By External Dip Switch:
Input Video Format
Pedestal Present/Not Present
Narrow/Wide Blanking
AGC On/Off
EDH On/Off
Test Pattern
Power
(AJA power supply model DWP) 5v DC regulated, 4 watt
Size 147 x 79 x 25 mm (5.8" x 3.1" x 1")