Apotop DW17 Wi-Reader Pro - Manual (Page 2)

1.Plug internet cable into RJ-45 jack. It is recommended to
keep the Wi-Reader Pro connected to the computer; or a
USB power adapter.
2.Slide the Function switch to the position; the power
indicator will light and after a short while, the indicator
will blink blue and the Wi-Reader Pro will be available. Tap
the Settings App on your iOS device, then select Wi-Fi (on
Android, go to Wi-Fi setting). From this Wi-Fi list, select
Wi-Reader Pro_xxxxxx (x represents random digits).
3.Open the device’s browser then enter “10.10.1.1” in
the space provided for the URL.
4.Select Settings at the top right of the screen.
5.Select Gateway and then tap Next. At the next LAN
Interface screen, tap Next again.
1.Open the Wi-Reader Pro App as previously described. Tap the
Collections icon at the bottom of the screen and the Collections
screen will appear.
2.If any files have been saved to your collection, simply tap on
one to play/view it in the Wi-Reader Pro App.
3.To Upload a file from your device to an SD card/flash drive,
tap Upload From Smartphone. Select file(s) then tap Choose
target folder then tap Upload and the unit will upload the files.
4.While in the Collection’s list, tap the icon (top right),
tap on the desire file and then click the icon (top left). This
will bring up options which allow you to Upload, Export,
Rename, Move or Delete the selected file.
5.While in the Collection’s list, tap the icons to perform the
following functions:
Tap to create a new folder.
Tap to sort the files, either by Name, Type or Date.
1.Open the Wi-Reader App as previously described. Tap the
Collections icon at the bottom of the screen and the Collections
screen will appear.
2.If any files have been saved to your collection, simply tap on
one to play/view it in the Wi-Reader App.
3.To Upload a file from your photos on your device to an SD
card/flash drive, tap Upload From Camera Roll. Select photo(s)
then tap Done. Select where to upload the files to, then tap
Done and the unit will upload the files.
4.While in the Collection’s list, tap the Edit button at the top
right to bring up the icons at the bottom of the screen.
Select a file, then tap the icon. This will bring up a screen
that will allow you to Upload, Move, Export, Rename, Delete or
Mail the selected file.
Tap to create a new folder.
Tap to select all files.
Tap to sort the files, either by Name, Type or Date.
Viewing or Uploading Files in Your Collections
Creating a Wi-Fi Hotspot (Similar procedure for iOS or Android Device)
Illustrations are of the iPhone, but the other iOS and Android screens are very similar.
iOS
iOS
Android
Android
6.If connecting through a hotel room’s internet
connection, select DHCP from the WAN Access Type
pull down menu.
If connecting through ASDL modem, select PPPoE
from the WAN Access Type pull down menu and enter
your username/password. Tap Next.
7.At the Wireless Basic Setting screen, you can change
the SSID of Wi-Reader or tap on Next to continue.
8.At the Wireless Security Setup screen, you can set
the password of the Wi-Fi here then tap Finished.
The Wi-Reader Pro will reboot. You may have to
change the Wi-Reader Pro will reboot. You may have
to change the Wi-Fi to the Wi-Reader Pro_xxxxxx
again.
Wi-Fi Repeater
This unit can also be used as a Wi-Fi Repeater. This feature will allow you to extend
the signal by receiving the signal and then sending it out again, thus extending the
Tap the Settings icon at the bottom right of the screen to
bring up the Setting screen. The items listed on this screen
perform the following:
App Version: This is App version.
About Wi-Reader: If connected to the internet, tap this to
see more info about the Wi-Reader.
Send Feedback: Tap to send feedback about Wi-Reader or
the Wi-Reader app.
Device Setting: Tap to enter the Wi-Fi password and/or
change the Wi-Fi SSID.
Connect Setting (iOS only): Used by iOS, you will not need
this unless instructed.
Clean Thumnail Cache: Tap to clean the Thumbnail Cache
which takes space on your device.
Check storage Space: Tap to view the sda 1 Free Space and
the Collection files Used Space.
Logout (Android only): Tap to log out.
Settings Resetting the Wi-Reader Pro
If you are having trouble or experiencing erratic
operation with the Wi-Reader Pro, the blue light
flash while operating Wi-Reader Pro, follow the
instruction below.
Insert a pin or similar pointed object into the Reset
button, hold 3-4 seconds, until the blue light stop
flashing. This will reset the Wi-Reader Pro.
Contacting Us
If you have any trouble, please try resetting the unit as describe above. If that does
not work, you can contact us using the Send Feedback option in the Setting or
visiting www.carry.com.tw