Apotop DW21 Wi-Copy User Manual - Manual (Page 21)

19
Operation - Other Wi-Fi Setting
Other Wi-Fi Setting Screen Options
See below for instructions on how to change the language,
Reset to Default, WiFi Setting, and much more:
Plug internet cable into the RJ-45 jack.
Slide the Function switch to the position; the Power Indicator
will light and after a short while, the indicator will blink blue and
the Wi-Copy will be available. Tap the Settings App on your iOS
device, then select Wi-Fi (on Android, go to Wi-Fi setting). From
this Wi-Fi list, select Wi-Copy_xxxxxx (x represents random digits).
Open the device’s browser, then enter “10.10.1.1” in the
space provided for the url. The File Server screen will appear.
You can access your shared partitions here (devices plugged
into the Wi-Copy unit) or tap the Wi-Copy icon at the top left.
Select Settings at the top right of the screen.
Tap an icon to perform the following:
Multiple Language: Tap to change the language.
Reset to Default: Tap to reset the Settings to Default.
WiFi Setting: Tap to change the specific WiFi Settings,
such as the WiFi password or WiFi SSID.
Admin. Password: Tap to setup or change a username and
password.
Advanced Settings: Tap to change the Advanced Settings.
It is not recommended to change these
unless requested by Apotop.
Home: Tap to return to the File Server screen.
1
2
3
4
5