Apotop DW23 Wi-Backup User Manual - Manual (Page 24)

EN-24
NETWORK CONFIGURATION
Configuring Wi-Fi Hotspot
You can configure this device as a gateway and enable you to use this device as a
wireless access point.
To configure this function, perform the following:
1. Connect one end of the RJ-45 cable to the Ethernet port of the device.
2. Plug the other end of the RJ-45 cable to the Ethernet port on a router or network
switch.
3. On your mobile device, launch Wi-Backup APP.
4. Tap Settings tab.
5. Tap Device Setting > Gateway(WAN).
6. The WAN Interface Setup page appears. Select the type of internet connection
you are using.
Android iOS