Getting started direct mode (local), Direct mode (intranet), 3 english – Apotop DW31 ApoEye User Manual

Page 4: Connect to camera, Take photo, Loop recording, Quad view, Zoom in, Zoom out, Shoot video

Advertising
background image

| 3

English

Getting Started

Direct Mode (Local)

For initial use, install [ApoEye] app
on mobile. Each camera has a unique
Camera ID. (

U2-xxxxxxxx)

Password is not required for the initial use, however, it is advised
to go to [Setup] in app to setup password after connected.

• Set camera to Direct Mode

and wait until indicator turns
steady green.

• On mobile, activate WiFi.
• Run [ApoEye].
• Press camera bar to start.

Connect to Camera

• Set camera to Direct Mode

.

• On mobile, go to [Settings]

[Wi-Fi] Choose a camera.
3G connection will switch to

WiFi within 1 min.

• Run [ApoEye].
• Press camera bar to start.

For iOS user: For Android user:

Direct Mode (Intranet)

Mobile / PC


Take Photo

(SD card required)

(SD card required)

Loop Recording

• Record and archive in 3 min interval

Quad View

Zoom In

Zoom out

Shoot Video

Invert Image

Two Way Voice

• Tap to enable Quad View (up to four cameras).
• Tap a live view window to return to single view.

• Tap to talk to the camera from mobile;
tap again to allow the camera to talk back
to mobile.

Android:

iOS:

Note:1. Move the camera further away from mobile when echo occurs.
2. Mobiles with low CPU clock speed may not have audio during streaming.

Ver.1.0

U2-00000001

Available

U2-00000002

Available

U2-00000003

Available

CURRENT_AP

Connected

U2-00000001

Available

U2-00000002

Available

View

View

Album

Album

View

View

Setup

Setup

Advertising