B&B Electronics X09-009PKC-EA - Manual

X09 & X24-009PKC-EA 0205ds - 1/2
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com [email protected] [email protected]
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445 www.bb-europe.com [email protected] [email protected]
PRODUCT INFORMATION
B&B ELECTRONICS
X09-009PKC-EA shown
Models: X09-009PKC-EA, X24-009PKC-EA
Ethernet Radio Frequency Modems CE
Overview
Ethernet RF Modems contain an OEM RF Module that renders the modem the longest range performer in the RFd2d
(Radio Frequency device-to-device) segment of the wireless market . The integrated ethernet interface board extends
data system performance and flexibility by adding serial connectivity to Ethernet networks, with use of MaxStream serial
radio modems.
This RF Modem is optimized for mobile and remote applications, allowing OEMs and integrators to quickly test, monitor
and control their wireless systems via standard laptop and PC Ethernet ports. Additionally, the RF modem enables
worldwide access to wireless networks via the Internet.
The 900 MHz radio modem comes equipped with the best receiver sensitivity in the industry, making it one of the
longest range, low cost radio modems available. The 2.4 GHz radio modem can provide high performance and
dependable operation for deployment throughout the world
These radio modems are perfect for applications in automatic meter reading (AMR), supervisory control and data
acquisition (SCADA), home automation, security, instrument monitoring and point of sale (POS) systems among many
others. Ethernet RF Modems can be configured to integrate quickly and seamlessly into any new or existing design.
Features
• Plug-and-communicate (no configuration required)
• Ethernet interface
• Compatible with other MaxStream RS-232 and USB modems
• Transparent operation supports existing software & systems
• Simple configuration using software & standard AT commands
• Retries & acknowledgements for guaranteed packet delivery
• Peer-to-peer, point-to-point & point-to-multipoint networks
• Up to 65,000 network addresses available
• Allows up to 7 Frequency Hopping Spread Spectrum
independent pairs (networks) to operate in close proximity
• Low power modes for current consumption as low as 230 mA
• XON / XOFF or hardware flow control
• Signal strength reporting for link quality monitoring & debugging
• Support for multiple data formats (7/8 bits, Even/Odd/No Parity)