Playback & playout, Cont – Atomos Ninja 2 User Manual

Page 28

Advertising
background image

Loop Mode

LOOP MODE

The Ninja-2 has the ability to play back a single clip in loop mode
via the HDMI output. This can performed with captured clips at full
broadcast quality or the final edited clips from your hard drive.

To do this:
• Go into Playback mode
• Pick the clip you want to loop

Note that when you first select a clip for playback, longer clips will

take slightly more time before they start playing. All subsequent
navigation within clips of any size will be instantaneous.

• Use the scrub bar to locate the point you wish to start from (In point)

and select the

In point

icon on the top left hand side of the

playback screen. This will turn red to confirm that it is active.

• Repeat this for the desired Out point by selecting the

Out point

icon on the top right hand side. Again this will change to red.

• Now select the

Loop

icon in the top middle of the screen - that will

also turn red to indicate that it is active.

• Press the

Play

button. The segment of the clip you have selected

will now loop until you press the

Stop

button.

To change the In and Out points, just stop playback and adjust the start
and stop points. Press

Loop/Play

again.

You can loop the playback of the entire clip by simply pressing Loop,

then play.

REMOVE OVERLAY

At any time, you can hide all the visible controls by simply touching

the screen (away from any controls) once. Touch it again to bring
back the controls.

Headphone volume

Allows you to adjust the headphone volume while in the playback page

Timecode

This shows the timecode of the ‘Now’ line

Interlaced playback

Ninja-2 playback shows a frame at a time. If the video footage is
interlaced (ie with two fields, each separated by 1/50th or 1/60th of a
second) it will play back perfectly well, but when playback is stopped,
the frame showing on the screen will flicker between the two fields.

This is a useful and accurate method to determine whether your
originally captured footage is progressive (even if it is delivered via an
interlaced signal) or genuinely interlaced.

11. Playback & Playout

cont.

Atomos Ninja-2 – User Manual Edition 3: May 2013 26

Advertising