Using the ronin – Atomos Ronin User Manual

Page 14

Advertising
background image

Atomos Ronin – User Manual Edition 1: June 2013 12

7. Using the Ronin

File Naming

Allows you to select the scene and shot number that will be
recorded next. To select press

scene

or

shot

at the top

and the number you wish to use from the list below (up to 999).
The number you choose will then be shown underneath the
word Scene or Shot in a larger font and will be underlined.
The take number is automatically increased with each take.

Date & Time

Allows you to adjust the date and time shown by the clock
and calendar in the Ronin. Touching the

Date

&

Time

takes you into the Date and Time Screen. At the top of the
screen is the date and the time of day. The month, day
and year are selectable by touching them, at which point
a scrollable list of dates, months or years will show below,
depending on which option has been selected.

To enter a date, for example, begin by touching the month
at the top of the screen, and then select the required month
from the list below. Then touch the day, and then the year,
selecting the required value from the list below.

Setting the time is done in exactly the same way.

Date formats (i.e. dd-mm-yyyy or mm-dd-yyyy) are
selectable on the right of the screen. Just keep touching
the

date

format

icon until it shows the format you

want to use.

Display Options / Screen Lock

Allows you to modify the brightness of the screen. You are
presented with a horizontal slider. Touch it anywhere on it’s
length to increase or decrease the brightness of the display
or you can tap the + and - buttons at each end.

SCREEN LOCK

A new feature for the Ronin is the ability to Lock the screen
so no changes can be made by mistakenly touching the
screen. To Lock the screen press the power button located
on the side of the Ronin once quickly.

You will see

Locked

will flash on the screen. Press again

to Unlock.

When you access the Display Icons you can choose to
disable your screen but only when the screen is locked. While
Locked, Display is >

On/off

Ronin Info

Shows the software (firmware) version and unique device
ID (DID) of your Ronin device. This will be useful if you ever
have to speak to Atomos technical support or a support
agent from your reseller. You can also check on the Atomos
website to ensure you are running the latest firmware:

http://www.atomos.com/Ronin/firmware/

Power Off

Turns the Ronin off. You need to press Power Off for four
seconds. Alternatively, you can press the physical On/
Off button on the right side of the Ronin for four seconds
to force shutdown. Atomos recommends using the
touchscreen

Power

Off

function .

Timecode

Takes you to the dedicated timecode configuration page.
Refer to Part 7 of this manual for more information.

Remember that pressing a large blue arrowhead will

always take you back to the previous menu you were in.

Smaller controls and indicators around t he Home Screen

There are a number of smaller controls that double-up as indicators
around the Home Screen.

Input

At the top left of the screen is not actually a control but will change to
display information about the signal being input to the Ronin at the time.

If there is no input, it will say No Input. When a valid signal source is
connected, the display will change to (for example) 1080i50.

Video Compression Format

At the top middle of the screen shows which version of ProRes

®

you are

using. You can change between versions (LT, HQ and 422) by repeatedly
touching the indicator.’

Advertising