Audio Developments AD114 - Manual (Page 21)

20
POWER SUPPLY UNIT
TYPE AD100-015
The AD100-015 mains POWER SUPPLY UNIT is suitable for driving most of
AUDIO DEVELOPMENTS’ range of portable audio mixers. This PSU is a single-rail
device providing 1A of current at +14V DC potential and is used as a substitute for
battery power with mixers containing an internal DC-DC converter.
The AD100-015 may be powered from either a 110/120V AC source or a 220v/240V
AC source. Operating the equipment at the wrong voltage could be hazardous.
Care must be taken to connect the LIVE, NEUTRAL and EARTH pins of the PSU’s
IEC mains connector to the corresponding terminals associated with the AC source.
The green LED illuminates when the PSU is operational.
FOR SAFETY REASONS, AD100-015 POWER SUPPLY UNIT MUST BE
CONNECTED TO MAINS EARTH. Any maintenance to the PSU or its mains cable
assembly should be performed by a qualified engineer.
For continued safety the specified fuse link must be fitted in the mains fuse holder
when a replacement is required. Ensure it is of a type approved by a National
Approved Body.
DC-OUTPUT XLR PIN 1
OV PIN 3 NOT CONNECTED
PIN 2 CHARGE PIN 4 +14V DC
DO NOT REMOVE THE OUTER COVERS
NOTE: The power supply unit should be serviced by a suitably qualified engineer.
Only genuine spare parts with identical specification must be used.
It is DANGEROUS to change the specification or modify the product in any way.