AudioEngine A5+ POWERED SPEAKERS - Manual (Page 4)

audioengine A5+ setup guide audioengine A5+ setup guide 4 5
A5+ Front Left (Active/Powered) A5+ Front Right
(Passive)
A5+ Back Left A5+ Back Right
A5+ Bottom Left A5+ Bottom Right
Volume
Control
Power
Indicator
7”
10.75”
Remote
Receiver
7.75”
0.75”
¼”-20
threaded insert
High-density
foam isolation pad
115
Output to
Passive Speaker
Variable Output
Audio Input 2
Power On/Off
Voltage Select
AC Power Inlet
Audio Input 1
USB Power
Remote Control
Mute
Press the Mute button to silence the A5+. The front panel
indicator will blink showing that the speaker is muted. Press
Mute again to unmute the volume.
Note that you can also bring the A5+ out of mute by pressing
Volume (+) or (-) or turn the front panel volume knob.
Volume
Press Volume (+) or (-) to adjust the A5+ volume level.
Sleep
This button puts A5+ into a power-saving Sleep Mode, shown
by the front panel power indicator as a slow pulse. To exit
Sleep press the Sleep button again.
Note that you can also put the A5+ into and out of Sleep
Mode by pressing the front panel volume knob.