AudioEngine S8 POWERED SUBWOOFER - Manual (Page 7)

S8 setup guide 10 11
Note: If using a receiver or surround sound processor always
refer to the instruction manual for specific setup procedures, op-
tions, and warnings.
Setup Diagrams
The diagrams that follow show the most common setup and
connection options to connect your S8 to other audio gear.
Option A
Connect a stereo RCA cable from your receiver’s preamp SUB
OUTPUT to the S8 subwoofer INPUT.
• If your receiver has a single (mono) SUB OUT, connect an RCA
cable from this output to the S8 RCA right (R) input.
• If your receiver has an LFE output, connect an RCA cable from
this output to the S8 LFE IN.
Note: Your receiver’s manual should indicate which subwoofer
connection is most appropriate.
Option B
Connect a mini-jack or RCA cable from any audio product (iPod,
computer, CD player, TV, etc.) to one of the S8 INPUT connectors.
Option C
Connect a stereo RCA cable from your Audioengine 5+ LINE OUT
into the S8 subwoofer INPUT.