Autocue Conference System - Manual (Page 2)

Components
A
Monitor
mounting
base
B
Conference
Stand lower
stem
C
Conference
Stand upper
stem
D Glass Holder
E Glass
Assembly
1. Secure the lower
glass stem to the
monitor mounting
base using the two
thumbscrews.
2. Mount the upper stem to
the lower stem by screwing
the two components
together.
3. Mount the glass holder to
the upper stem and secure by
tightening the thumb screw (
A )
A
4. Install the glass by
inserting It into the
clamp and secure in
place by tightening
the clamp knob. (
A )
The blue dot should
face the speaker.
Place the monitor on a flat
surface with the monitor
fixing holes facing upwards
and secure the monitor
mounting base using four
screws.
Note: MSP Monitors do not
need fixing to the monitor
mounting base.
A
Monitor Mounting
Completed unit
A
B
C
D
E