Autocue MS LWA Hood - Manual (Page 2)

Hood Assembly
A
Glass Frame
Retainer
B Hood
C Bracket Set
Components
A
B
C
Bracket Set Assembly
2. Ensure the
drop plate is in the
appropriate
position on the
bracket.
A Drop Plate
B Hood Poles
C
Monitor
Poles
A
B
C
1. Screw the monitor
and hood poles into
the slide nuts on the
bracket set.
The bracket has
markings to indicate
the correct pole
positions.
2. Release the
glass frame
retainer using the
knob on top.
3. Pull the catch
forwards and lift it
up to release the
glass frame. Lower
the glass frame.
4. Insert the
glass in the
frame.
Ensuring the
blue dot is
facing down.
5. Holding the
frame to avoid
fingerprints on
the glass, push
the frame up
into the closed
position.
6. Position the
catch over the
frame and fasten
by pushing the
assembly back
into position and
secure using the
knob.
1. Mount the hood
onto the hood poles,
secure in place at the
desired height by
tightening the clamps.
(
A )
A