Autocue Softbox Kit - Manual (Page 2)

Assembly
1. Insert the four hood
rods in the mounting
holes on the rim of
the light head.
2. When the four rods
are installed the hood
will then be formed
into a rectangular
shape.
3. Ensure that the Velcro
fastenings are secure.
4. Install all four lamps
into the head.
5. When all the lamps
are installed, to test
the unit is working plug
the unit in and switch
the unit on using the
power switches on the
rear of the head.
6. Stretch the diffuser
between all four corners
of the hood.
7. Ensure that the
diffuser is secured on
all four sides using
the Velcro strips.
8. The softbox is now
complete and ready
for use.
9. Mount the softbox
on the top of the
stand and secure in
place using the clamp
screw. (A)
Stand Adjustment
Open the legs by
loosening the clamp
screw and pull out to
the desired angle and
retighten the clamp
screw. (A)
To adjust the height of
the stand loosen the
clamp screw and raise
the stand to the desired
height. (B)
B
A
A