7 return on-prompt item (unique id) – Autocue WinCue Pro News ADR 2006 User Manual
Page 21
WinCue Pro News ADR Interface User Guide
Configuration •
•
•
•
21
2.1.3.7
Return On-Prompt Item (Unique ID)
The Return On-Prompt Item settings are used to enable WinCue to send
information back to the newsroom system from the prompter.
Note: It is necessary that your newsroom system is able to receive files that are
sent from the WinCue prompter.
Firstly enable the setting by clicking on the Return On-Prompt Item check box,
once you have done this the Edit Start Sequence button, and Edit End
Sequence button will become enabled. Click on the Edit Start Sequence
button to enter the code that will signal the start of the information being sent
back to your newsroom system. Then click on the Edit End Sequence button to
enter the code that will signal the end of the information being sent to your
newsroom system. Once you have added the coding details to both of these,
WinCue will be able to send information back to your newsroom system.