Autocue TFM17 - Manual (Page 15)

TFM17 Assembly and Installation Guide
www.qtv.com 12 www.autocue.com
Issue
#
: 081
017
©
2003
-200
8
Au
to
cu
e Grou
p Ltd
S
ECTION
6:
TFM17 Operation
OSD (On Screen Display) menus are used to configure the TFM17 and prepare it
for displaying scripts.
N OTE : While operating your TFM17, troubleshooting or maintenance
tasks may need to be performed on the prompter display unit.
For guidance, refer to section 7.
6.1: Connections
Once your TFM17, on-camera unit and camera combination are securely mounted
on a tripod attach the TFM17 cabling.
N OTE : Ensure you have a power supply and video signal available.
1. Connect the video signal to the appropriate input socket.
2. Connect the IEC power cable to the power input socket.
6.2: Operating your TFM17
Turn on the TFM17 and if necessary, use the control buttons to adjust the
positioning and appearance of the image displayed.
All units are checked before being shipped using the default factory settings.
Depending on the ambient lighting conditions where you will be operating the
TFM17, you may need to adjust the brightness and contrast of the image.