Balboa Water Group Slimline Escutcheon - Manual

SLIMLINE ESCUTCHEON
INSTALLATION INSTRUCTIONS
INSERT THE RUBBER O’RING # 2 INTO THE SLlMLlNE WALL FITTING # 1. 1.
PLACE THE SLlMLlNE EYEBALL # 3 ON TOP OF THE O’RING # 2. 2.
PLACE THE POLY SPACER # 4 ON TOP OF THE EYEBALL # 3. 3.
CENTER THE SLlMLlNE ESCUTCHEON PLATE # 5 OVER THE FACE OF THE SLlMLlNE WALL 4.
FITTING # 1, AND TIGHTEN UNTIL SNUG.
CAUTION: DO NOT USE ABRASIVE OR CAUSTIC CLEANSERS ON DECORATIVE
ESCUTCHEONS AS THEY WILL DAMAGE THE FINISH AND VOID THE WARRANTY.
88-4037 Rev A June 29, 2009