Brother MFC 7860DW - Manual (Page 41)

25
4
4
How to send a fax
4
The following steps show how to send a fax.
a
When you want to send a fax, or change
fax send or receive settings, press the
(FAX) key to illuminate it in blue.
b
Do one of the following to load your
document:
 Place the document face up in the
ADF. (See Using the automatic
document feeder (ADF) on page 22.)
 Load your document face down on
the scanner glass. (See Using the
scanner glass on page 23.)
c
Set the scanner glass size, fax
resolution or contrast if you want to
change them.
For more advanced fax sending
operations and settings, see Sending a
fax in Chapter 3 of the Advanced User's
Guide:
 Broadcast
 Delayed Fax
 Batch TX
 Real Time TX
 Polled TX
 Overseas Mode
 Fax Resolution
 Contrast
 Coverpg Setup
 Coverpage Msg
d
Enter the fax number using the dial pad,
a One touch key or (Address Book)
and enter three-digit number.
e
Press Start.
Faxing from the ADF
 The machine starts scanning the
document.
Faxing from the scanner glass
 If you press Start, the machine starts
scanning the first page.
Do one of the following:
• To send a single page, press 2 to
choose No (Send) (or press
Start again). The machine starts
sending the document.
• To send more than one page,
press 1 to choose Yes and place
the next page on the scanner
glass. Press OK. The machine
starts scanning the page. (Repeat
this step for each additional
page.)
If you press Start, the machine
starts sending the document.
Note
To cancel, press Stop/Exit.
Sending a fax
4