Bang & Olufsen BeoLab 11 - User Guide - Manual (Page 8)

Adapt the subwoofer to your setup
Placement is flexible and easy
with the subwoofer. Due to its
relative small size it can easily
be integrated in most home
environments, and may be
placed almost anywhere you
wish in the room.
To obtain the most natural
sound you should place the
subwoofer on the floor in the
front half of the room – based
on your favourite listening
position.
Setting the POWER LINK and
LINE switch
Use this switch to set up your
system.
…To a Bang & Olufsen system:
Use a Bang & Olufsen Power Link
cable to connect the subwoofer to
your system. Set the switch to
POWER LINK.
…To a non-Bang & Olufsen
system:
Use a special cable with an
ordinary phono/mini jack plug in
one end, and a DIN-plug in the
other (optional accessory, available
from your Bang & Olufsen retailer).
Set the switch to LINE.
Setting the -dB/0dB switch
Use the -dB/0dB switch to adapt
the output from the subwoofer to
the sensitivity levels of the different
connected BeoLab speakers.
Only when using the subwoofer
with BeoLab 4 PC, set the switch
to -dB.
For all other speakers, set the
switch to 0dB.
L R
8
Ideally the subwoofer should be
placed at about the same
distance from your favourite
listening position as the front set
of speakers, that is, the left,
(centre) and right speakers.
If possible, you should choose a
placement between the two front
speakers.