Bang & Olufsen BeoSound Century - User Guide - Manual (Page 10)

U S I N G T H E R A D I O
10
Listening to radio programs
0 1 2 3 4 5 6 7 8 9
RADIO CD TAPE AUX < STEP
MODE
STOP
REC
STEP >
STORE
TUNE
SOUND LOAD
Pressing the RADIO button makes the
display and all the buttons for operating
the radio light up. At the same time, the
radio starts playing the program you
were last listening to.
The program number is indicated in the
display, for example: P 3.
To switch to another program, you can
either key in its number directly using
the number buttons, 0 - 9; or you can
press the step buttons,
<
STEP or
STEP
>
, to browse through all your
programs.
The system only makes the necessary
number buttons available. That is, if you
only have stored radio programs on the
numbers 1 to 5, only the buttons 1 to 5
will be lit.
If you select another source, the radio
stops automatically. To switch off the
entire system, press the stand-by
button,
●.
Note: If you press RADIO again while the radio is
playing, you can see the frequency for the current
radio station in the display. Press RADIO again to
revert to the program number indication.
Note: The REC button makes it easy to record the
radio program you are listening to. See how on
page 18.
Turns on the radio
Press to browse through your radio
programs, forwards...
or
...or backwards
Alternatively, key in the exact
program number you want,
for example 12
Press to raise the volume
Press to lower the volume
Press to switch the system to stand-
by
Selecting another source also turns
off the radio
> Selecting radio programs using the method
described on this page requires that you have
tuned in to all your favourite radio stations and
stored them on program numbers of their own.
See how on the next pages.
RADIO
1
2
∧
∨
●
STEP
>
<
STEP